Decorate Your Room with Wallpaper
The following is a step by step explanation of how to decorate our walls with pre-sized paper. For this, the first thing we do is prepare the wall to improve the adhesion of the paper. Walls should be clean and smooth as possible, so if the walls and has a wallpaper before we withdraw and if they have cracks or other imperfections we fill them and correct them before installing new wallpaper. Then we take the height dimensions of the wall or industry sector that we will decorate, to cut the paper (should cut an extra inch of the action taken). Note that after the first strip cut is necessary in the following match the prints, so it may be necessary to trim any segment. For the sizing of paper it is essential to follow the manufacturer’s instructions to ensure the correct procedure and not at risk of wasting the paper.
We began to place the paper from top to bottom, leaving an inch above the junction of the wall with the roof, pushing them to adhere to and continue to put down (we can also draw a vertical line that serves as a guide to place the first right guide). Once placed with a spatula pressed the paper along the ceiling and along the floor or base to remove all air and cut the excess (do likewise in the angles of junction of the walls so that the paper does not break). Repeat for the following strips placed, ensuring that the designs match. When we find window and door frames and outlets continue with the hit and left to cut the end edges.
