Posts Tagged ‘board’
How to properly laid out Deck Plans and Design
In order to successfully build a deck whether you use an expert or you build a deck yourself, you will need a properly laid out deck plans and design.
Decks remain a popular choice when it comes to home improvement and reviewing deck plans can go a long way in helping you to decide what kind of deck you want. Choose deck plans that have a proven track record for best results before you start building your own deck.
1. Design the Deck
Before you even begin to build the deck you first need to cover some basic things such as where the deck is going to be situated as well as the size it is to be. You will also need to determine the materials you intend to use and how access to the deck will be achieved.
Next you should contact your local zoning board so that you are aware of the permits and licenses that you might need. Review some deck design plans to help you get a few ideas regarding the look and feel of the deck that you want.
2. The Layout
When it comes to completing this project successfully you should determine the right locations for the deck footings and to do this there are two methods to use: Firstly, Install a ledger board to determine 2 positions at the house to work from. Secondly, do not forget that your deck plans will be in 2D and so you will need to make sure that your lines are leveled. This will ensure that your deck is not misshapen upon completion.
3. Setting the Posts
You need to dig a hole and pour concrete into it. A 60 pound bag of ready mix would be advisable. Place the concrete pier into the still wet concrete within the hole. The concrete will obviously harden around the pier and so provide stability.
By use of a screw gun and screws you then need to fix the post to the pier. By following this method the post will be neither inside the concrete nor underground and therefore exposed to the elements. The post will then be attached above the ground between the metal anchors which are attached to the pier.
4. Framing the Decking
It is vital that you use heavy-duty supports and pressure-treated lumber when constructing the component parts as the deck framing needs to be sturdy enough in order to properly support both the weight of the deck and hold up with the passage of time.
Just like proper framing is important for houses likewise it is important for decks. There are a number of ways to achieve proper framing which include installing ledgers and beams so as to pour concrete piers and cutting stair stringers. If you need some free advice regarding deck details you should approach your local building authorities.
5. The Deck Stairs
This part is rather simple and anybody with a limited amount of knowledge when it comes to construction really should be able to construct an attractive set without much hassle.
Most people opt for one or two flights of stairs from the deck to the surrounding yard. Depending upon your aesthetic preferences you can choose from a variety of different ways to do this. Bear in mind that some municipalities do have specific codes that you will need to be aware of and take into account when you design and then construct the stairs. Some cities actually require a minimum width of 3 feet for the stairs so find out about that first.
6. Completing the Deck
All decks will face adverse weather conditions and if you neglect to apply a protective coating to your completed deck you will run into problems sooner or later. To avoid the wood weathering you should make sure that you finish it soon after you have completed building it. Woods such as pressure treated wood, cedar, and redwood are all examples of wood that will require protection.
Rustic Decor for the Kitchen
Forgetting the traditional tiles to achieve a rustic kitchen can choose other types of coatings that are very fashionable and look great with the rustic look that we want to give our kitchen. We talked about the slate and lava. These coatings agree well with the interior decoration and cuisine.
The slate can be sliced thick or so. For soil and the wall, we can use leaves unpolished slate retains their irregularities. Depending on your kitchen cabinets, you can choose from pale gray slate, others blue or even with green. Slate is a living material that resists heat though, is fragile, so it is advisable to book this type of coating used parts except the kitchen. Wood brushed stainless steel stick very well with the board or the lava.
The lava stone is achieved by working with volcanic lava. Heated, colored pigments are added before forming cut to size slabs for work surfaces and floors. The advantage of this coating is that you can set the stain is best for us. In addition, it is quite heat resistant and highly resistant to wear and tear. Its main drawback is its high price.
As for colors and shades, yellow is perfect for this type of cuisine. Put the yellow in your kitchen. Egg yellow, straw, sun, sunflower, ocher or cake … any of these colors is ideal and offers a beautiful regardless of their intensity. For example, slate, yellow brings real ray of sunshine in the kitchen. Combines well with yellow, can be:
White and Yellow: Tiles white with bright yellow frieze and live wood furniture and furniture painted pastel yellow. It can be an excellent combination.
Blue and Yellow: This combination is classic and modern at once. Furniture painted with yellow and blue contours and tiling motif pastel yellow, blue or white.
The Color is orange and yellow. This combination is reserved for the more adventurous cooks. Walls painted in shades of orange, yellow tiles and wooden furniture painted in shades of orange.